Register Register Member Login Member Login Member Login Forgot Password ??
PHP , ASP , ASP.NET, VB.NET, C#, Java , jQuery , Android , iOS , Windows Phone
 

Registered : 109,036

HOME > PHP Manual > fopen - Opens file or URL





ลองใช้ค้นหาข้อมูล


   
Bookmark.

fopen

(PHP 4, PHP 5)

fopenOpens file or URL

Description

resource fopen ( string $filename , string $mode [, bool $use_include_path [, resource $context ]] )

fopen() binds a named resource, specified by filename , to a stream.

Parameters

filename

If filename is of the form "scheme://...", it is assumed to be a URL and PHP will search for a protocol handler (also known as a wrapper) for that scheme. If no wrappers for that protocol are registered, PHP will emit a notice to help you track potential problems in your script and then continue as though filename specifies a regular file.

If PHP has decided that filename specifies a local file, then it will try to open a stream on that file. The file must be accessible to PHP, so you need to ensure that the file access permissions allow this access. If you have enabled safe mode, or open_basedir further restrictions may apply.

If PHP has decided that filename specifies a registered protocol, and that protocol is registered as a network URL, PHP will check to make sure that allow_url_fopen is enabled. If it is switched off, PHP will emit a warning and the fopen call will fail.

Note: The list of supported protocols can be found in List of Supported Protocols/Wrappers. Some protocols (also referred to as wrappers) support context and/or php.ini options. Refer to the specific page for the protocol in use for a list of options which can be set. (e.g. php.ini value user_agent used by the http wrapper).

On the Windows platform, be careful to escape any backslashes used in the path to the file, or use forward slashes.

<?php
$handle 
fopen("c:\\data\\info.txt""r");
?>

mode

The mode parameter specifies the type of access you require to the stream. It may be any of the following:
A list of possible modes for fopen() using mode
mode Description
'r' Open for reading only; place the file pointer at the beginning of the file.
'r+' Open for reading and writing; place the file pointer at the beginning of the file.
'w' Open for writing only; place the file pointer at the beginning of the file and truncate the file to zero length. If the file does not exist, attempt to create it.
'w+' Open for reading and writing; place the file pointer at the beginning of the file and truncate the file to zero length. If the file does not exist, attempt to create it.
'a' Open for writing only; place the file pointer at the end of the file. If the file does not exist, attempt to create it.
'a+' Open for reading and writing; place the file pointer at the end of the file. If the file does not exist, attempt to create it.
'x' Create and open for writing only; place the file pointer at the beginning of the file. If the file already exists, the fopen() call will fail by returning FALSE and generating an error of level E_WARNING. If the file does not exist, attempt to create it. This is equivalent to specifying O_EXCL|O_CREAT flags for the underlying open(2) system call.
'x+' Create and open for reading and writing; place the file pointer at the beginning of the file. If the file already exists, the fopen() call will fail by returning FALSE and generating an error of level E_WARNING. If the file does not exist, attempt to create it. This is equivalent to specifying O_EXCL|O_CREAT flags for the underlying open(2) system call.

Note: Different operating system families have different line-ending conventions. When you write a text file and want to insert a line break, you need to use the correct line-ending character(s) for your operating system. Unix based systems use \n as the line ending character, Windows based systems use \r\n as the line ending characters and Macintosh based systems use \r as the line ending character.
If you use the wrong line ending characters when writing your files, you might find that other applications that open those files will "look funny".
Windows offers a text-mode translation flag ('t') which will transparently translate \n to \r\n when working with the file. In contrast, you can also use 'b' to force binary mode, which will not translate your data. To use these flags, specify either 'b' or 't' as the last character of the mode parameter.
The default translation mode depends on the SAPI and version of PHP that you are using, so you are encouraged to always specify the appropriate flag for portability reasons. You should use the 't' mode if you are working with plain-text files and you use \n to delimit your line endings in your script, but expect your files to be readable with applications such as notepad. You should use the 'b' in all other cases.
If you do not specify the 'b' flag when working with binary files, you may experience strange problems with your data, including broken image files and strange problems with \r\n characters.

Note: For portability, it is strongly recommended that you always use the 'b' flag when opening files with fopen().

Note: Again, for portability, it is also strongly recommended that you re-write code that uses or relies upon the 't' mode so that it uses the correct line endings and 'b' mode instead.

use_include_path

The optional third use_include_path parameter can be set to '1' or TRUE if you want to search for the file in the include_path, too.

context

Note: Context support was added with PHP 5.0.0. For a description of contexts, refer to Stream Functions.

Return Values

Returns a file pointer resource on success, or FALSE on error.

Errors/Exceptions

If the open fails, the function an error of level E_WARNING is generated. You may use @ to suppress this warning.

ChangeLog

Version Description
4.3.2 As of PHP 4.3.2, the default mode is set to binary for all platforms that distinguish between binary and text mode. If you are having problems with your scripts after upgrading, try using the 't' flag as a workaround until you have made your script more portable as mentioned below
4.3.2 The 'x' and 'x+' option was added

Examples

Example #1 fopen() examples

<?php
$handle 
fopen("/home/rasmus/file.txt""r");
$handle fopen("/home/rasmus/file.gif""wb");
$handle fopen("http://www.example.com/""r");
$handle fopen("ftp://user:[email protected]/somefile.txt""w");
?>

Notes

Warning

When using SSL, Microsoft IIS will violate the protocol by closing the connection without sending a close_notify indicator. PHP will report this as "SSL: Fatal Protocol Error" when you reach the end of the data. To work around this, the value of error_reporting should be lowered to a level that does not include warnings. PHP 4.3.7 and higher can detect buggy IIS server software when you open the stream using the https:// wrapper and will suppress the warning. When using fsockopen() to create an ssl:// socket, the developer is responsible for detecting and suppressing this warning.

Note: When safe mode is enabled, PHP checks whether the directory in which the script is operating has the same UID (owner) as the script that is being executed.

If you are experiencing problems with reading and writing to files and you're using the server module version of PHP, remember to make sure that the files and directories you're using are accessible to the server process.



ThaiCreate.Com Forum


Comunity Forum Free Web Script
Jobs Freelance Free Uploads
Free Web Hosting Free Tools

สอน PHP ผ่าน Youtube ฟรี
สอน Android การเขียนโปรแกรม Android
สอน Windows Phone การเขียนโปรแกรม Windows Phone 7 และ 8
สอน iOS การเขียนโปรแกรม iPhone, iPad
สอน Java การเขียนโปรแกรม ภาษา Java
สอน Java GUI การเขียนโปรแกรม ภาษา Java GUI
สอน JSP การเขียนโปรแกรม ภาษา Java
สอน jQuery การเขียนโปรแกรม ภาษา jQuery
สอน .Net การเขียนโปรแกรม ภาษา .Net
Free Tutorial
สอน Google Maps Api
สอน Windows Service
สอน Entity Framework
สอน Android
สอน Java เขียน Java
Java GUI Swing
สอน JSP (Web App)
iOS (iPhone,iPad)
Windows Phone
Windows Azure
Windows Store
Laravel Framework
Yii PHP Framework
สอน jQuery
สอน jQuery กับ Ajax
สอน PHP OOP (Vdo)
Ajax Tutorials
SQL Tutorials
สอน SQL (Part 2)
JavaScript Tutorial
Javascript Tips
VBScript Tutorial
VBScript Validation
Microsoft Access
MySQL Tutorials
-- Stored Procedure
MariaDB Database
SQL Server Tutorial
SQL Server 2005
SQL Server 2008
SQL Server 2012
-- Stored Procedure
Oracle Database
-- Stored Procedure
SVN (Subversion)
แนวทางการทำ SEO
ปรับแต่งเว็บให้โหลดเร็ว


Hit Link
   







Load balance : Server 02
ThaiCreate.Com Logo
© www.ThaiCreate.Com. 2003-2024 All Rights Reserved.
ไทยครีเอทบริการ จัดทำดูแลแก้ไข Web Application ทุกรูปแบบ (PHP, .Net Application, VB.Net, C#)
[Conditions Privacy Statement] ติดต่อโฆษณา 081-987-6107 อัตราราคา คลิกที่นี่